" id="ContentPlaceHolder1_VideoFrame" style="width: 100%; height: 100%; position: absolute; top: 0; left: 0;" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen="">
DAH-LIH DMX-320

5-Axis Vertical Machining Center

- Workbench

working desk size: Ø320 mm

T-slot: 12H7 x 4

Maximum load of worktable: 150 kg

- Stroke

X-axis: 600 mm

Y-axis: 550 mm

Z-axis: 500 mm

Distance from spindle nose to table surface: 50 ~ 500 mm

Track type (X, Y, Z-axis):  Linear slide

- Feed

X-axis rapid traverse feed: 40 m / min

Y-axis rapid traverse feed: 40 m / min

Z-axis rapid traverse feed: 30 m / min

Cutting feed: 18,000 m/min

Minimum feed: 0.001 mm

- Spindle

Drive method: Direct type

Spindle motor: 7.5 kW (10HP) / 5.5kW (7.5HP)

Spindle taper: NT40

Spindle speed: 10,000 rpm

Spindle bearing specifications: Ø70 mm

Spindle torque: 47N-m

Cooling/lubrication method: Oil cooling / grease lubrication

- Automatic Tool Changer (ATC)

Tool magazine capacity: 24 sticks

Tool holder form: BT40

Handle bolt type: 45°

Tool weight: 7 kg

Maximum tool length: 265 mm

Tool diameter: Ø95 mm

The maximum diameter of the knife next to each other: Ø185 mm

Knife selection method: Arbitrary

- Motor

X-axis servo motor: 4 kW (5.3 HP)

Y-axis servo motor: 4 kW (5.3 HP)

Z-axis servo motor: 4 KW (5.3 HP)
  • Heat exchanger
  • Mobile hand arterial wave generator
  • Fully enclosed shield
  • Ethernet function
  • Automatic power-off function
  • Warning Light
  • Automatic lubrication device
  • working lamp
  • Tools and Toolbox
  • Prepare the fuse
  • Rotary control panel
  • Spindle oil cooling
  • 24-knife cam-type tool change system
  • Rigid tapping
  • Spiral chip conveyor on bed
  • Five-axis control / four-axis simultaneous function
  • A, C axis optical scale (±10")
  • Screw chip conveyor with chip car
  • Crawler chip conveyor with chip car
  • The spindle runs through the cooling device with filter
  • Base chip flushing device
  • Laser automatic tool length measuring device (non-contact type)
  • Automatic workpiece measuring device
  • Optical ruler (X, Y, Z)
  • 30, 32, 40 tool cam-type tool change system
  • 12,000rpm / 15,000 rpm direct-drive spindle (15HP)
  • 15,000 rpm direct-drive spindle (25HP)
  • 15,000 rpm built-in spindle (20HP)
  • Ball screw hollow cooling
  • Five-axis simultaneous function
  • A, C axis optical scale (±5")

To learn more Download the Data Sheet

Get More Info