DAH-LIH DCM-2213

Double Column Machining Center

- Workbench

Workbench area: 2,500 x 1,350 mm

T-slot (width x number of slots x pitch): 22 x 9 x 150 mm

Maximum load: 4,000 kgw

Distance from table to the ground: 905 mm

- Stroke

X-axis travel: 2,200 mm

Y-axis travel: 1,300 mm

Z-axis travel: 760 mm

Distance from spindle nose to table surface: 200 ~ 960 mm

Effective goalpost width: 1,400 mm

- Feed 

Rapid traverse feed: 12/15 /15 m/min

Cutting rate: 1 ~ 10,000 mm / min

Minimum feed: 0.001 mm

- Spindle

The slope of spindle end hole: NO.50 (NO.40)

Spindle speed: 60 ~ 6,000 (15,000) rpm

Spindle bearing specifications: Ø100 (Ø70) mm

Cooling/lubrication method: Oil cooling / grease lubrication

- Automatic Tool Changer (ATC)

Tool magazine capacity: 32 (40 / 60) sticks

Knife type: BT50 (BBT40)

Tool weight: 18 kgw

Maximum tool length: 400 mm

Tool diameter: Ø125

The largest diameter of the knife next door: Ø250 mm

Knife selection method: Any knife

- Motor

Spindle motor (30 minutes/continuous): 18.5 / 15 (15 / 11) kw

Three axis motor (X, Y, Z axis): 6 / 4.2 / 4.2 kW
  • Spindle cooling device
  • Annular cutting fluid device
  • Heat exchanger
  • Mobile hand arterial wave generator
  • Upward chip conveyor + chip car
  • Spiral chip conveyor
  • Warning light (three layers)
  • working lamp
  • Tools and Toolbox
  • Closed guard
  • Spindle BBT40 15,000 rpm
  • Chip oil system
  • The deep hole drilling device
  • Spindle through the cooling device (Type A) + high-pressure filter cartridge
  • Spindle penetration cooling device (Type A) + paper belt filter
  • Oil mist device
  • Crawler chip conveyor + chip car
  • Oil-water separator
  • Automatic centering device
  • X, Y, Z-axis feedback ruler system
  • Tool breakage detection device
  • Tool length measuring device
  • Tool setter
  • 90° milling head
  • 40/60 tools
  • Cutting fluid and air spray gun
  • Air cooler

To learn more Download the Data Sheet

Get More Info