The only way to get industrial-grade parts in hand in hours, not weeks — the X7 enables engineers and designers to fundamentally improve their manufacturing operation at light speed.

About the X7

The Markforged X7 CFR industrial 3D printer combines precision-built hardware, advanced sensors, and best-in-class software to deliver accurate parts repeatably. It features a reinforced, precision-machined gantry and a precision ground print bed that can be removed and replaced with 10 μm repeatability. Each piece of hardware in the filament extrusion system — from the nozzles to the extruder hobs — is optimized to resist wear from micro carbon fiber-filled nylon filaments and maintain print quality over thousands of hours. Out of material sensors ensure that you’re always printing while a scanning laser on the printhead enables the printer to dynamically adjust the first layers of a print to achieve perfect bed adhesion and inspect parts for accuracy after printing.

The X7 has a 3rd-generation fiber reinforcement system that enables you to lay down continuous fiber into parts. Only Markforged composite printers are capable of printing continuous fiber reinforced parts.


X7 (All continuous fibers)

High Performance 3D Printers

The X7 3D prints Continuous Carbon Fiber reinforced parts in hours that are as strong as — and capable of replacing — machined aluminum.

Whatever your functional requirements are — flame-resistant, chemical resistant, energy absorbent, high resolution, draft parts — the X7 has an industrial material or print mode capable of fabricating a functional part for you.

Precision-machined hardware, advanced sensors, and unique software drive industry-leading accuracy and reliability. Only Markforged industrial 3D printers offer micron-level laser scanning for closed-loop calibration, reliably yielding parts with 50 μm repeatability and industry-leading surface finish.

Plastics Available

Onyx, Onyx FR, Onyx ESD, Nylon White

Fibers Available

Carbon fiber, fiberglass, Kevlar®, HSHT fiberglass

Tensile Strength

800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum)

Tensile Modulus

60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum)

Layer Height

100 μm default, 50 μm minimum, 250 µm maximum

Infill

Closed-cell infill: multiple geometries available